A mid-ranged corrosion resistant alloy with good strength

washer s

Originally developed to combat sea water corrosion, AL6XN has expanded its role as being good mid-range corrosion resistant alloy. AL-6XN washers are a low carbon, high purity, nitrogen-bearing "super-austenitic" stainless alloy. With a higher nickel and molybdenum content than Duplex 2205 and Super Duplex 2507, it deliver better corrosion resistance while giving a more cost effective alternative to nickel super alloys like Inconel or Hastelloy in moderately corrosive conditions.

Corrosion Resistance
•  Moderate general corrosion resistance
•  Excellent chloride / salt water protection
•  Good performance in phosphoric acid
•  Do not use in nitric acid

AL6XN Corrosion Comparison

Corrosion Chart revised

Chemical Resistance
In chemical processes which utilize chlorides, such as paper mills and waste water, stress corrosion cracking (SCC) is a common culprit for 316L stainless failures. Duplex alloys will outlast environments that will cause SCC in 316 stainless, but for more severe low PH environments, washers made from higher nickel content alloys like AL6XN will generally work better. For the most extreme situations, alloys with >45% nickel content like Hastelloy are often considered.

Outstanding Resistance to Salt Water
Seawater is where AL-6XN washers outperform so many alloys providing protection to stress corrosion cracking, pitting and crevice corrosion in a broad range of marine applications. AL-6XN washers contain a minimum of 6% molybdenum content and it is this addition of molybdenum that provides the greatest protection against pitting and crevice corrosion.

Mechanical Properties
Electrical Resistivity: 535 Ohm-circ mil/ft
Ultimate Tensile Strength: 108 ksi
0.2% Yield Strength: 53 ksi
Density: 0.291 lb/in 3

AL6XN strength Comparison v2

Chemistry
•  High molybdenum content provides enhanced corrosion protection in chloride environments.
•  Carbon helps to prevent sensitization during welding
•  Chromium enhances pitting and crevice corrosion resistance
•  The interstitial strengthening effect of nitrogen gives AL-6XN washers good high strength properties

AL-6XN Applications
•  Desalination plants depend on AL-6XN washers for the salt water corrosion protection
•  Pulp bleaching equipment and piping 
•  The power industry uses AL-6XN washers where salt water and chlorides are present such as steam surface condensers, supercritical, high pressure, feed water heaters, steam surface condensers, flue-gas desulfurization equipment and in nuclear power water piping 
•  Offshore 
•  Chemical Processing - processing tanks, vessels and pipes as well as plate and frame heat exchangers.

Resouces: Al-6XN Torque Specs

AL-6XN Bolt Types: Flat Washers & Lock Washers

 


AL6XN Chemical Composition & Specifications

Specifications: UNS N08367, ASTM A 240, ASTM B 688, ASME SA-240, ASME SB-688, ASTM B690, ASTM B691, ASTM A240, ASTM B688, ASME SA-240, ASME SB-688

AL6XN Chemistry 2


 AL-6XN Mechanical Data

 AL-6XN Tensile Data


Corrosion Curves for AL-6XN

HCL ISO CORROSION CURVE AL 6XN

Sulfuric Acid Iso CORROSION CURVE al-6xn

Phosphoric Acid Iso Corrosion Curve AL 6XN

Corrosion Chart AL6XN

Request a Quote / Order

Call: 888-393-4517 or Submit a Request

Not sure what material is best for your application?

Contact an Expert

Questions?

Our material experts are ready to help guide you through your specific application.

Contact an Expert