Tag Archives: sour gas

Hastelloy bolts for hydro-treating with sour gas – H2S

Posted on November 16, 2017 by dean

Q: I’m running a hydro-treating process that is running at 350-390°C where we’re producing H2S and NH3. Any ideas on a bolt that can handle the temperature and chemicals? A: In this type of process you having to deal with high temperatures and the formation of sulfuric acid (H2SO4) from the H2S especially … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, High Temperature Resistance, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , , | Leave a comment

Incoloy 825 vs Hastelloy C276 for Sour Gas

Posted on November 13, 2017 by dean

Q: I need bolts for a well pump exposed to sour gas? I’ve currently use Incoloy 825 bolts which works reasonably well, but I’m wondering if there is a better choice that is more economical and could offer equal or better corrosion resistance – any ideas? A: A great nickel alloy bolt … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, Material, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , , , | Leave a comment

Hastelloy and Incoloy: Fasteners for Oil Field Corrosion

Posted on September 29, 2017 by dean

Oilfields are subjected to a diversity of corrosive elements including carbonic acids, sour gas (H2S), and fracking/stimulant acids such as hydrochloric and hydrofluoric acid. Naphthenic acids and simple organic acids are also found in crude oil extraction. In conjunction to acids, these environments contain sand and other abrasive elements which … Continue reading →

Posted in Application, Blog, Corrosion Resistance, High Strength, High Temperature Resistance, Specialty Metal Fasteners | Tagged , , , , , , , , , , , , , , , , | 1 Comment

Incoloy 925 bolts for sour gas & chloride application

Posted on August 16, 2017 by dean

Q: I have down hole application containing sour gas and high chloride levels. The temperature the bolts are exposed to is around 150F and I’m having trouble with cracking. I tried Super Duplex 2507 but am still having issues. Any ideas? A: Super Duplex 2507 does provide good resistance to … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, Material, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , , | Leave a comment

Bolt for hot hydrogen sulfide, CO2, hydrocarbons & salt water

Posted on August 9, 2017 by dean

Q: I need a material that will be suitable for oil and gas use. Submersion in hydrogen sulfide, carbon dioxide, hydrocarbons, salt water at temperatures up to 325F. Crevice corrosion has been a factor. Also need 170ksi min tensile strength. Plus we’d like to torque a 3/8-24 fastener to 50 … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, High Strength, Specialty Metal Fasteners, Technical Questions, Uncategorized | Tagged , , , , , , , , | Leave a comment

17-4PH bolts for high pressure sour gas well

Posted on June 12, 2017 by dean

Q: I’ve got in a high pressure sour gas well. We’ve been having trouble with 316 stainless steel components breaking. I need a solution but not sure what to use. A: High pressures and sour gas combined can cause cracking and corrosion in most standard stainless and alloy steels. Depending … Continue reading →

Posted in Application, High Strength | Tagged , , , , , , | Leave a comment

Inconel 625 vs. 718 bolts: Which Is Best for Your Application?

Posted on March 6, 2017 by dean

Inconel fasteners are commonly used for extreme environments and come in various “flavors” depending on the needs of the application. This brief paper will give you a quick comparison of the two most popular grades, Inconel 625 and Inconel 718 to help you choose the best material.

Posted in Blog | Tagged , , , , , , , , , , , , | 1 Comment