Tag Archives: corrosion resistance

Hastelloy: Fasteners for phosphoric and sulfuric acid process

Posted on January 23, 2018 by dean

Q: I’m using a pretty corrosive wet process to produce phosphoric acid. It involves taking phosphate rock and the addition of concentrated (93%) sulfuric acid in a series of well-stirred reactor. Any ideas on bolting that won’t corrode my bolts and fasteners? A: Since your process is exposed to both … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , | Leave a comment

Nickel Alloys Part 1: Moderate Corrosion

Posted on November 2, 2017 by dean

Nickel alloys are a special class of metals containing high levels of nickel (often greater than 20%). They play a key role in industry for their unique combination of high strength, corrosion resistance to harsh acids (like hydrochloric and sulfuric) and high temperature stability. This two-part newsletter will help summarize the distinct benefits of the … Continue reading →

Posted in Application, Blog, Corrosion Resistance, Material, Specialty Metal Fasteners | Tagged , , , , , , , , , , , , , , , , | Leave a comment

Corrosion resistance of Inconel 625 bolts vs Hastelloy C276

Posted on August 28, 2017 by dean

Q: Inconel 625 and Hastelloy C276 bolts seem to have similar Nickel content. Does this mean these fasteners will perform the same in a corrosive environment? A: Inconel 625 and Hastelloy C276 bolts do offer similar corrosion resistance but Hastelloy C276 has a slight edge in many acidic environements, especially … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, Material, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , , , , , , , , , | Leave a comment

AL6XN vs Alloy 20 Fasteners: What’s the difference? Which is best?

Posted on June 1, 2017 by dean

These two alloys are often confused as being almost the same, which is almost true. They are both nickel alloys and share many key characteristics. AL6XN and Alloy 20 are alike in that they each retain their strength to about 1000°F. In addition they both perform well, in salt water environments, … Continue reading →

Posted in Blog | Tagged , , , , , , , | Leave a comment

Zirconium fasteners exposed to downstream oxidizers

Posted on May 25, 2017 by dean

Q: I’m using zirconium fasteners in a sulfuric acid process but they are showing corrosion. I’m not sure why as I’m well below boiling and only using 40% concentration. There may be some downstream contaminants, but not much. Any ideas? A: It is most likely the contaminants that are causing … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, High Temperature Resistance, Material, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , , , , , , , , , , , , | Leave a comment

Corrosion Resistant Titanium Fasteners – More Than Meets the Eye!

Posted on July 15, 2015 by dean

Titanium fasteners are well known for their amazing combination of high strength and lightness of weight, but a lesser known characteristic of titanium is its unique corrosion resistance.

Posted in Blog | Tagged , , , , , | Leave a comment