Tag Archives: Sulfuric Acid Corrosion

Sulfuric Acid: Which Fastener Material is Best?

Posted on September 6, 2022 by Kathleen

Sulfuric Acid ( H2SO4 ) is one of the most widely used and important acids, being an essential component to many industries. Equally as important is selecting the right material to survive this environment. This newsletter will provide options. WHICH IS BEST? That depends on BOTH concentration and temperature – … Continue reading →

Posted in Advanced Ceramic Fasteners, Blog, Corrosion Resistance, Engineered Polymer Fasteners, Material, Specialty Metal Fasteners, Uncategorized | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment

Hastelloy: Fasteners for phosphoric and sulfuric acid process

Posted on January 23, 2018 by dean

Q: I’m using a pretty corrosive wet process to produce phosphoric acid. It involves taking phosphate rock and the addition of concentrated (93%) sulfuric acid in a series of well-stirred reactor. Any ideas on bolting that won’t corrode my bolts and fasteners? A: Since your process is exposed to both … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , | Leave a comment

Hastelloy C276 Fasteners for Flue Gas Desulfurization Scrubbers

Posted on January 18, 2018 by dean

Q: I’m operating a FGD (Flue Gas Desulphurization) plant and am experiencing some mild corrosion on my scrubber bolting. I’m currently using Incoloy 825 bolts. It’s mild corrosion but non-the-less I’d like to have it cleared up before I get additional issues. Any suggestions? A: Since scrubber liquids and gases … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, Material, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , , , , , , | Leave a comment

Hastelloy vs Tantalum Bolts for Sulfuric Acid Corrosion in Lithium Extraction

Posted on January 3, 2018 by dean

Q:  I’m running a lithium extraction process where a mineral called spodumene is roasted in a mixture of sulphuric acid (95-97%) at at about 150°C to form lithium sulfate. I’ve to use Hastelloy C276 for some process equipment but I’m still experiencing corrosion. Please help. A:  Hastelloy C276 bolts typically … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, High Temperature Resistance, Material, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , , , , , , , | Leave a comment

Hastelloy fasteners for HCL & H2SO4 in Municipal Waste Incinerator

Posted on December 27, 2017 by dean

Q:  I’m running a municipal solid waste incinerator and am having trouble corrosion from a combination of hydrochloric acid and sulfuric acid that is derived from chloride and sulfur containing compounds in the waste fuel stream. I was using Duplex steel bolts for the chloride corrosion but they aren’t holding up … Continue reading →

Posted in Application, Corrosion Resistance, FAQs, Material, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , , , , , , , , | Leave a comment

Alloy 20 fasteners for sulfuric acid corrosion

Posted on August 23, 2017 by dean

Q: I’m working with boiling sulfuric acid and tried Alloy 20 for some of my bolting but am having corrosion. I’m confused as I thought that is what they are best for. Any suggestions. A: You are right Alloy 20 does typically perform very well in sulfuric acid and even … Continue reading →

Posted in Application, FAQs, Material, Specialty Metal Fasteners, Technical Questions | Tagged , , , , , , , , , , , , , | Leave a comment